Rolling Fire Door Inspection & Drop Testing is one of the most common calls we get. A technician will explain what is wrong and what it will cost before starting, and test the door before leaving. Annual drop testing and inspection of rolling fire doors.
When to call for rolling fire door inspection & drop testing
- Your annual fire door inspection is due
- A fire marshal or insurer has noted a deficiency
- The door failed to close during a test
Why this happens
- NFPA 80 requires fire doors to be inspected and tested at least once a year
Before the technician arrives
- Keep the path under fire doors clear at all times.
Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.
How we handle rolling fire door inspection & drop testing
- Visually inspect the door and its labels
- Perform a drop test
- Reset the release mechanism
- Repair any deficiencies
- Document the results for your records
How much does rolling fire door inspection & drop testing cost?
What moves the price:
- Door size, gauge and cycle rating
- Operator type and controls
- Parts availability for your model
- Lift equipment and after-hours access
These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.
Local rolling fire door inspection & drop testing for Riverview, MO
With large seasonal temperature swings in Missouri, track brackets and hinge screws work loose over time, and a loose track is the most common reason a door rubs, binds or comes off its rollers.
Technicians serve all of Riverview, plus Versailles (16.4 mi), Warsaw (17.1 mi), Four Seasons (20.2 mi) and Osage Beach (24.8 mi). Call (833) 435-8883 to book a visit in Riverview.
Rolling Fire Door Inspection & Drop Testing: frequently asked questions
How much does rolling fire door inspection & drop testing cost in Riverview, MO?
Rolling Fire Door Inspection & Drop Testing typically costs $150-$500 including parts and labor, and usually takes about 1 hour per door. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.
Can you do rolling fire door inspection & drop testing the same day?
Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.
Is rolling fire door inspection & drop testing covered by a warranty?
Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.
Are your technicians licensed and insured?
Our technicians are insured, and where Missouri or Riverview requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.
Should I repair or replace my commercial door?
A good rule of thumb: if the repair costs more than about 50% of a replacement, or the commercial door is near the end of its life, replace it. Commercial doors are rated by cycles. If the door has reached its rated cycle life, has several damaged sections, or parts are no longer made, replacing it is often cheaper over the next few years. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.